Licensed, insured, and ready to dry out your bathroom today

Bathroom Mold Removal Service in NORTH HOLLYWOOD, California

Our Bathroom Mold Removal Service in NORTH HOLLYWOOD, California starts with a moisture meter and thermal imaging camera, not a sales pitch. We find the leak behind the tile, kill the black mold growth, and dry the framing so it does not come back. If your shower grout has gone dark or the room smells musty every morning, we can be there today.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service North Hollywood — your local Mold Remediation Service team
Careful work. Honest options.
About this service

Bathroom Mold Removal Service in NORTH HOLLYWOOD, California

A Bathroom Mold Removal Service in NORTH HOLLYWOOD, California is a licensed remediation process that locates the water source feeding the growth, contains the work area, removes contaminated drywall, grout, and caulk, and treats the framing with an antimicrobial solution before rebuilding. We follow ANSI/IICRC S520, the industry standard for mold remediation, so every cut line, containment wall, and clearance test is documented. Most single-bathroom jobs take one to three days from containment to final spore trap sample.

North Hollywood bathrooms get hit hard. The older 1920s to 1950s bungalows near the NoHo Arts District have original cast-iron drains and small windows that never dry out, while the newer Toluca Lake and Studio City builds seal tight and trap steam. Add a leaky shower pan or a slow toilet supply line and you have the perfect conditions for black mold growth. If you have been searching for bathroom mold removal service in NORTH HOLLYWOOD California near me, we handle the whole job, from the moisture reading to the clearance test.

  • ✓ Same-Day Response
  • ✓ Leak Source Fixed First
  • ✓ Clearance Testing Included
  • ✓ Containment That Protects Your Home
What's included

What Our Bathroom Mold Removal Service Includes

Every bathroom mold job we run in North Hollywood includes the inspection, containment, removal, drying, and clearance testing under one flat-rate price. Here is what is covered on a standard scope, and what we quote separately if the damage turns out to be larger than the initial inspection showed.

✓

Moisture Inspection and Mapping

A certified technician uses a moisture meter, thermal imaging camera, and boroscope inspection camera to map exactly where the water has traveled. You get photos and a written scope before any demolition starts.

✓

Containment and Negative Air

6-mil containment plastic sheeting, a zipper door, and a negative air machine with HEPA filters keep spores out of the rest of your home. We also seal the HVAC register in the bathroom so nothing migrates through the ductwork.

✓

Removal and Antimicrobial Treatment

Contaminated drywall, caulk, and grout are cut out and bagged. Exposed framing gets HEPA vacuumed, then treated with Benefect or Concrobium. Where the wood is sound but stained, we apply an encapsulant coating to seal it.

✓

Structural Drying

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers run until the wall cavity drops below 15 percent moisture content. Drying typically takes 24 to 48 hours, and we monitor the readings daily.

✓

Post-Remediation Clearance Test

A spore trap sampler collects air in the bathroom and in an adjacent room. The lab compares indoor counts against an outdoor control. You get the written report, and if it does not clear, we re-clean at no charge.

✓

Rebuild and Re-Caulk

Once clearance passes, we replace the drywall, re-caulk the tub or shower surround with mold-resistant silicone, and repaint with a bathroom-grade coating. The bathroom is ready to use the same day we finish.

How it works

How Our Bathroom Mold Removal Process Works

01

Inspection and Testing

A certified technician walks the bathroom with a moisture meter and thermal imaging camera, then checks inside the wall cavity with a boroscope inspection camera. We take air samples with a spore trap sampler and, when needed, surface swabs. This visit takes 45 to 60 minutes and tells us exactly how far the growth has spread.

02

Containment Setup

We hang 6-mil containment plastic sheeting across the doorway and any open wall cavities, install a zipper door for access, and set up a negative air machine with HEPA filtration. This keeps the rest of your home at normal air pressure so spores cannot migrate into the bedroom or hallway. Setup takes about an hour.

03

Removal and Cleaning

Contaminated drywall, caulk, and grout get cut out and bagged. We HEPA vacuum every exposed surface, then apply an antimicrobial solution such as Benefect or Concrobium to the framing. Porous materials that cannot be saved come out; solid wood framing gets cleaned and, where needed, sealed with an encapsulant coating.

04

Drying and Verification

We place Dri-Eaz or Phoenix Restoration Equipment dehumidifiers and air movers to bring the wall cavity below 15 percent moisture content. Drying usually runs 24 to 48 hours. Once the readings hold steady, we take a final spore trap sample and send it to the lab for comparison against an outdoor control.

05

Rebuild and Handoff

After clearance, we replace the drywall, re-caulk the tub or shower surround, and repaint with a mold-resistant bathroom coating. You get the lab report, the photo documentation, and a walkthrough of what to watch for. Most customers are back to using the bathroom the same day the rebuild is finished.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Reveals temperature differences behind tile and drywall that indicate hidden moisture. We use it to map the full extent of a leak before we open any wall.

Moisture Meter

Pin and pinless readings confirm the exact moisture content of drywall, framing, and subfloor. We record readings before, during, and after drying to prove the assembly is dry.

Boroscope Inspection Camera

A small camera on a flexible probe that lets us look inside wall cavities and under shower pans without large demolition. This is how we confirm growth on the back side of drywall.

HEPA Vacuum and Air Scrubber

ProTeam and Abatement Technologies units capture spores down to 0.3 microns. Every surface gets HEPA vacuumed before and after antimicrobial treatment.

Negative Air Machine

Keeps the contained work zone under negative pressure so air flows in, not out. This is the single most important piece of equipment for keeping spores out of the rest of your home.

Dri-Eaz and Phoenix Dehumidifiers

Low-grain refrigerant and desiccant dehumidifiers pull moisture out of the wall cavity and subfloor. We run them until readings drop below 15 percent moisture content.

Spore Trap Sampler

Collects airborne spores onto a cassette for laboratory analysis. We use it for the pre-remediation baseline and the post-remediation clearance test.

Real results

Before and after.

NoHo Arts District Shower Rebuild

Before

A 1948 bungalow with black mold growth on the back side of the shower drywall and a failed shower pan that had been leaking for months. Moisture readings in the framing were above 28 percent, and the bottom plate showed early wood rot.

After

We removed 32 square feet of contaminated drywall, treated the framing with Concrobium, and dried the cavity to 11 percent moisture content over 48 hours. The clearance test came back below the outdoor control. New drywall, new pan, new caulk, and the shower was back in use on day four.

Toluca Lake Ceiling and Attic Remediation

Before

Dark staining on the bathroom ceiling after a February rain storm. The attic sheathing above the bathroom had visible black mold growth across roughly 40 square feet, and the insulation was saturated from a flashing leak around the vent pipe.

After

We contained the attic work zone, removed the wet insulation, HEPA vacuumed and treated the sheathing with an antimicrobial solution, and applied an encapsulant coating to the stained but sound wood. The roofer replaced the flashing, and the post-remediation test cleared on the first sample.

Valley Village Slab Leak Bathroom

Before

A mid-century duplex with mold on the bathroom baseboard and the adjacent hallway carpet. A slab leak under the bathroom floor had been active for at least three weeks. Moisture readings in the subfloor were above 25 percent and the bottom plate was wet.

After

We extracted standing water, ran Dri-Eaz dehumidifiers and air movers for 72 hours, then remediated the affected baseboard and bottom plate. The plumber rerouted the slab line overhead. Final moisture readings were 10 to 12 percent, and the clearance test passed.

Problems we solve

Bathroom Mold Problems We Solve in North Hollywood

Most bathroom mold calls start with one of a handful of root causes. Here are the ones we see most often in North Hollywood, what happens if you ignore them, and how we fix them.

Ask a pro →
01

Shower pan leaking into the wall cavity

We cut an inspection opening, confirm the leak with a moisture meter, and remove the saturated drywall and insulation. The framing gets HEPA vacuumed and treated with an antimicrobial solution, then dried below 15 percent moisture content before we close it back up.

↗
02

Musty odor that returns after cleaning

We use a thermal imaging camera and boroscope inspection camera to find the hidden colony, then remove the source material and run air scrubbers with HEPA filters and activated carbon. The odor clears when the mold is actually gone, not just covered up.

↗
03

Mold after a slab leak or supply line break

We treat it as a combined water damage and mold job. Structural drying comes first with dehumidifiers and air movers, then remediation of any material that already has growth. This order matters, and it is why we test before we cut.

↗
04

Recurring mold on grout and caulk lines

We remove the failed caulk, clean the grout with a HEPA vacuum and antimicrobial treatment, and re-caulk with a mold-resistant silicone. If the grout itself is compromised, we can re-grout the shower as part of the rebuild.

↗
Proof you can check

Licensed, Certified, and Insured

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA 10 Construction SafetyOccupational Safety and Health Administration
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most single-bathroom jobs run $450 to $1,800 in 2026, with the average around $850. Small surface growth on tile and grout that has not reached the drywall often comes in under $600. Jobs that require cutting out drywall, replacing a shower pan, or treating a slab leak push toward the top of the range. We give you a written flat-rate price after the inspection, and the inspection itself is free.

Because moisture is still getting into the wall, ceiling, or floor. North Hollywood bathrooms in older homes often have undersized exhaust fans, uninsulated exterior walls that condense in winter, and original cast-iron drains that seep at the joints. If you clean the mold and it returns within a month or two, the source has not been fixed. We trace it with a moisture meter and thermal imaging camera before we remove anything.

Yes. We run 24/7 dispatch and can usually get a technician to your door within 60 to 90 minutes for active leaks or visible growth. Same-day bathroom mold removal NORTH HOLLYWOOD California appointments include the inspection, containment setup, and the start of removal. Full drying and clearance testing take another one to three days depending on how wet the framing is.

The best method is physical removal of contaminated material plus HEPA vacuuming and an antimicrobial treatment, not bleach spraying. Bleach kills surface mold but does not reach the roots inside drywall or grout. We cut out what cannot be saved, HEPA vacuum the framing, apply Benefect or Concrobium, and dry the cavity below 15 percent moisture content. Then we verify with a spore trap sample.

Ready when you are

Book Your Bathroom Mold Removal Service in NORTH HOLLYWOOD, California

Call (833) 929-5837 and we will schedule a technician, not a salesperson. Free inspection, flat-rate pricing, IICRC-certified crews, and a written clearance test at the end. Same-day and 24/7 emergency appointments available across North Hollywood and the San Fernando Valley.

Get Free Inspection (833) 929-5837 →
Request an appointment

Contact Our NORTH HOLLYWOOD Team

Call (833) 929-5837 any time - our line is answered 24/7 by a live technician, not a call center. For non-emergency estimates, we schedule same-day or next-day visits across NORTH HOLLYWOOD and the surrounding Valley. Send photos to our email if you want a quick read before we come out.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837