Lab-backed testing that tells you exactly what is growing and where

Black Mold Inspection in NORTH HOLLYWOOD, California

A Black Mold Inspection in NORTH HOLLYWOOD, California starts with a moisture meter and a thermal imaging camera, not a guess. We inspect the attic, crawl space, bathrooms, and HVAC closets where NoHo's older stucco-and-plaster homes trap damp air, then send spore trap cassettes to a certified lab. If you have smelled something musty since the last rain, call (833) 929-5837 and we will find the source.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Professional Black Mold Inspection in NORTH HOLLYWOOD
Careful work. Honest options.
About this service

What a Black Mold Inspection in NORTH HOLLYWOOD, California Covers

A Black Mold Inspection in NORTH HOLLYWOOD, California is a room-by-room moisture and air assessment that locates active mold growth, identifies the water source feeding it, and documents the findings with lab results. We start with a visual walkthrough, then confirm what we see with a moisture meter and a thermal imaging camera that reads temperature differences behind drywall. Where a wall cavity looks suspect, a boroscope inspection camera goes through a 3/8-inch hole instead of a demolition crew. Air samples are collected with spore trap cassettes and read by an accredited lab, usually within 24 to 48 hours.

Most calls we get from NORTH HOLLYWOOD black mold inspection customers start the same way: a musty odor in a hallway closet, a dark stain spreading across a ceiling, or allergy symptoms that clear up when someone leaves the house. This area gets winter rain that finds every failed roof flashing, and 1920s-to-1960s bungalows along the Burbank Boulevard Corridor hold that moisture in lath and plaster for weeks. If you have been searching for black mold inspection in NORTH HOLLYWOOD California near me, the first step is a real assessment, not a spray bottle.

  • ✓ Lab-Confirmed Answers
  • ✓ Same-Day Scheduling
  • ✓ Hidden Moisture Found
  • ✓ Scope You Can Budget From
What's included

What Our Black Mold Inspection Includes

Every inspection includes the on-site assessment, instrumented moisture mapping, and a written report. Air and surface sampling with accredited lab analysis is included in the standard package. Remediation, if needed, is quoted separately after you have the results in hand.

✓

Full Visual Assessment

Attic, crawl space, bathrooms, laundry, water heater closet, HVAC closet, and every sink cabinet. We photograph anything suspect and note the moisture source feeding it. Most homes take 60 to 120 minutes on site.

✓

Moisture Meter Readings

Pin and pinless readings on walls, ceilings, and floors. Anything above 15 to 20 percent gets flagged. We record the numbers in the report so you can track them after repairs are made.

✓

Thermal Imaging Scan

An infrared camera reads temperature differences behind finished surfaces. This is how we find wet drywall, hidden leaks, and cold spots that condense moisture without cutting anything open.

✓

Air and Surface Sampling

Spore trap cassettes indoors plus one outdoor control, and tape lifts on visible growth. Samples go to an accredited lab, and results identify genus and spore count per cubic meter in 24 to 48 hours.

✓

Written Report With Photos

A plain-language summary of what we found, what is causing it, and what to fix first. Includes photos, moisture readings, lab results, and a recommended scope if remediation is warranted.

How it works

How Our Inspection Process Works

01

Phone Intake

We ask what you are seeing, smelling, and when it started. A photo texted to (833) 929-5837 often tells us whether to bring a boroscope or an extra dehumidifier. You get a flat inspection price before we roll, and a same-day slot if the situation is active.

02

Visual Walkthrough

We inspect the attic decking, crawl space, bathrooms, laundry, water heater closet, and every sink cabinet. In NORTH HOLLYWOOD homes we pay extra attention to 1950s galvanized supply lines and flat or low-slope roof sections, both of which feed slow, invisible leaks.

03

Moisture Mapping

A moisture meter and thermal imaging camera check walls, ceilings, and floors for readings above the 15 to 20 percent range where mold colonizes. Suspicious cavities get a boroscope inspection camera look. This step is what separates a real assessment from a visual once-over.

04

Air and Surface Sampling

We run spore trap cassettes indoors and one outdoor control sample, plus tape lifts on visible growth. Samples go to an accredited lab, and results come back in 24 to 48 hours with genus identification and spore counts per cubic meter.

05

Written Report

You receive photos, moisture readings, lab results, and a plain-language summary: what is growing, what is feeding it, and what to fix first. If remediation is warranted, we outline the scope. If it is not, we tell you that too and save you the money.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Reads temperature differences behind finished surfaces to locate hidden moisture, wet drywall, and cold spots that condense water. Non-invasive and fast.

Moisture Meter

Pin and pinless readings on walls, ceilings, and floors. Anything above 15 to 20 percent gets flagged. Numbers go in the report so you can track them after repairs.

Boroscope Inspection Camera

A 3/8-inch scope that looks inside wall cavities, behind tile, and under cabinets through a small access hole. Finds growth without demolition.

Spore Trap Sampler

Draws a measured volume of air across a spore trap cassette. Lab analysis identifies genus and counts spores per cubic meter, compared against an outdoor control.

HEPA Vacuum

Captures fine spores and debris during inspection and cleanup. Essential when working around confirmed growth to avoid spreading spores to unaffected rooms.

Dehumidifier and Air Scrubber

Dri-Eaz and Phoenix Restoration Equipment units that pull moisture from the air and filter particles. Used when a wet area needs stabilization before remediation.

Negative Air Machine

Maintains negative pressure inside a containment zone so spores cannot escape into the rest of the home. Standard equipment on any remediation scope.

Real results

Before and after.

Hidden Bathroom Leak in Toluca Lake

Before

A homeowner noticed a musty smell in the hallway but no visible growth. A moisture meter read 28 percent along the shared wall with the bathroom. A boroscope inspection camera found active growth on the back side of the drywall, fed by a slow supply-line leak.

After

We documented the moisture source, sampled the growth, and confirmed Aspergillus/Penicillium with elevated spore counts. The homeowner had a plumber repair the line, then we removed and replaced 12 square feet of drywall. Clearance testing passed on the first try.

Post-Flood Crawl Space in Valley Village

Before

A winter storm pushed water into a crawl space through a failed foundation vent. Two weeks later, the homeowner noticed a musty odor in the living room. Moisture readings on the floor joists were above 25 percent, and visible growth covered roughly 40 square feet of subfloor.

After

We set up containment with containment plastic sheeting and a negative air machine, removed the affected subfloor sections, treated the joists with antimicrobial solution, and applied encapsulant coating. Post-remediation air sampling came back at background levels.

Attic Growth From Bath Fan in NoHo Arts District

Before

A duplex owner had a bath fan venting directly into the attic instead of outside. After two winters, growth covered the roof decking near the fan outlet. Thermal imaging showed the moisture pattern clearly, and air sampling confirmed elevated spore counts in the upstairs unit.

After

We rerouted the fan duct to an exterior termination, removed and replaced affected sheathing, and treated the surrounding framing with antimicrobial solution. Post-remediation testing came back clean. The tenant's asthma symptoms improved within a week.

Problems we solve

Mold Problems We Solve in NORTH HOLLYWOOD

Most mold calls trace back to one of a handful of moisture sources. We identify the source, document the growth, and give you a scope you can act on. No scare tactics, no padded square footage.

Ask a pro →
01

Musty odor with no visible growth

We use a thermal imaging camera and boroscope inspection camera to locate the source without demolition. Air sampling confirms whether indoor spore counts are elevated. Once we find the moisture, we tell you exactly what to fix.

↗
02

Dark staining on ceiling or wall

We map the wet zone with a moisture meter, sample the visible growth, and check the surrounding framing. The report tells you whether a localized repair is enough or whether a larger section needs removal.

↗
03

Allergy symptoms that ease away from home

We run indoor and outdoor air samples to compare spore counts directly. If indoor levels are elevated, the report identifies the genus and points to the likely source so you can fix the cause, not just the symptom.

↗
04

Post-flood or post-leak growth

We offer 24/7 emergency response and same-day sampling for active water events. Fast documentation protects your claim and lets us recommend drying versus removal based on actual readings.

↗
Proof you can check

Licensed, Certified, and Insured

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC CMI (Certified Microbial Investigator)American Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
CSLB Contractor LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential inspections run $250 to $550 in 2026, including the on-site assessment and a written report. Lab fees for air and surface samples typically add $75 to $150 per sample set. Larger homes, crawl space access issues, and commercial buildings price higher. We quote a flat rate before we arrive, so the number you hear on the phone is the number on the invoice.

The three reliable signs are a musty or earthy odor that does not clear with ventilation, visible dark staining with a speckled or fuzzy edge, and allergy-type symptoms that ease when you leave the house. Visible growth plus a moisture reading above 15 percent in the same spot is a strong indicator. Lab sampling confirms the genus and spore count.

Not every dark mold is Stachybotrys, and not every exposure causes illness. What we do know is that sustained spore exposure indoors aggravates asthma and allergies, and that mold growth always signals a moisture problem that will rot framing if left alone. The California Department of Public Health treats indoor mold as a moisture and air-quality issue, which is why we test before we recommend anything.

Yes, same-day appointments are available most weekdays, and we run 24/7 dispatch for active leaks and post-flood calls. Call (833) 929-5837 and we will give you the next open window. If you are in Valley Village, Sherman Oaks, or Studio City, we can often reach you within a few hours of the call.

Ready when you are

Schedule Your Black Mold Inspection in NORTH HOLLYWOOD, California

Flat-rate pricing, same-day availability, and lab results in 24 to 48 hours. If you smell something musty or see dark staining on a wall or ceiling, do not wait for it to spread. Call (833) 929-5837 and we will get a technician to your door.

Book Inspection Now (833) 929-5837 →
Request an appointment

Contact Our NORTH HOLLYWOOD Team

Call (833) 929-5837 any time - our line is answered 24/7 by a live technician, not a call center. For non-emergency estimates, we schedule same-day or next-day visits across NORTH HOLLYWOOD and the surrounding Valley. Send photos to our email if you want a quick read before we come out.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837