Licensed mold removal contractor in NORTH HOLLYWOOD California, on call 24/7

Mold Remediation Company in NORTH HOLLYWOOD, California

Mold Remediation Company in NORTH HOLLYWOOD, California is who you call when you spot black mold growth, smell that musty odor, or find water damage from leaks behind a wall. We are a licensed mold removal contractor NORTH HOLLYWOOD California homeowners and property managers trust for same-day inspections, containment, and full mold cleanup. Call (833) 929-5837 and we roll a truck today.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service North Hollywood serving NORTH HOLLYWOOD, California
Careful work. Honest options.
About this service

What a Mold Remediation Company in NORTH HOLLYWOOD, California Does

Mold Remediation Company in NORTH HOLLYWOOD, California is a licensed mold abatement company that finds hidden mold growth, stops the moisture feeding it, and removes contaminated material without spreading spores through your home. We start with a moisture meter and thermal imaging camera to trace the water source, then use a boroscope inspection camera inside walls and ceilings. Every job follows ANSI/IICRC S520, the industry standard for mold remediation, so containment, removal, and clearance testing are done in the right order.

In NORTH HOLLYWOOD, we see the same problems repeat: crawl space moisture under 1920s bungalows, attic condensation in older roofs, bathroom mold behind tile, and HVAC mold contamination after a slow leak. If you search for a mold remediation company in NORTH HOLLYWOOD California near me, you want a crew that knows this housing stock. We also serve nearby Toluca Lake and Studio City, where post-flood mold and structural wood rot from mold show up after winter storms.

  • ✓ Same-Day Emergency Response
  • ✓ Insurance-Ready Documentation
  • ✓ Certified Technicians on Every Job
  • ✓ Clearance Testing Included
What's included

What Our Mold Remediation Service Includes

Every job includes inspection, containment, removal, treatment, drying, and clearance testing. We do not nickel-and-dime you for HEPA vacuuming or antimicrobial application. Add-ons like crawl space encapsulation or HVAC duct cleaning are quoted separately after inspection.

✓

Full Mold Inspection and Testing

Moisture meter, thermal imaging camera, and boroscope inspection camera readings, plus air samples sent to an accredited lab. You get a written report with photos and species identification within 24 to 48 hours.

✓

Containment and Negative Air

Containment plastic sheeting, zipper doors, and a negative air machine with HEPA filters. This keeps spores from spreading to unaffected rooms while we work. Setup takes two to four hours on a typical job.

✓

Removal and HEPA Vacuuming

Contaminated drywall, insulation, and wood removed and bagged. Every surface HEPA vacuumed, then treated with antimicrobial solution such as Benefect or Concrobium. Debris hauled away and disposed of properly.

✓

Structural Drying

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air scrubbers run until framing moisture drops below 15 percent. Drying typically takes two to five days depending on how wet the structure is.

✓

Encapsulant Coating

After drying, we apply an encapsulant coating to seal porous surfaces like framing and subfloor. This locks in any residual spores and makes future moisture easier to spot during inspections.

✓

Post Remediation Clearance Testing

A third-party inspector takes air samples with a spore trap sampler. If counts are back to outdoor baseline, you get the clearance report and a written workmanship warranty. If not, we re-clean at no charge.

How it works

How Our Mold Removal Process Works

01

Inspection and Testing

A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and boroscope inspection camera. We map every wet zone, take air samples with a spore trap sampler, and send them to a lab. You get findings within 24 hours, usually the same day.

02

Containment Setup

We seal the work area with containment plastic sheeting and zipper doors, then run a negative air machine with HEPA filters to pull spores out and exhaust them outside. This keeps the rest of your home clean while we work. Setup takes two to four hours on a typical job.

03

Removal and Cleaning

Contaminated drywall, insulation, and wood get removed and bagged. We HEPA vacuum every surface, then apply an antimicrobial solution such as Benefect or Concrobium. For heavy growth on framing, we use dry ice blasting machine equipment to strip mold without damaging the wood.

04

Drying and Repair

We place Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air scrubbers to bring moisture levels down below 15 percent on framing. Once dry, we apply an encapsulant coating to seal porous surfaces. Drying usually runs two to five days depending on how wet the structure is.

05

Clearance Testing

A third-party inspector takes post remediation mold testing samples. If airborne spore counts are back to outdoor baseline, we hand you the clearance report and a written warranty on our workmanship. If anything fails, we re-clean at no extra charge.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal imaging camera

Finds temperature differences behind walls and ceilings that indicate hidden moisture or active leaks.

Moisture meter

Measures water content in drywall, wood, and framing to confirm what is wet and when it is dry.

Boroscope inspection camera

Looks inside wall cavities, ductwork, and crawl spaces without cutting large openings.

Air scrubber and negative air machine

Filters airborne spores and maintains negative pressure inside containment so mold does not spread.

HEPA vacuum

Removes settled spores from surfaces after removal. We use ProTeam and Abatement Technologies units.

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers

Pull moisture out of framing and air until readings drop below 15 percent.

Dry ice blasting machine

Strips mold from structural wood without chemicals or abrasives that would damage the surface.

Spore trap sampler

Collects air samples before and after remediation so a lab can verify spore counts.

Real results

Before and after.

Bathroom Mold Behind Tile in NoHo Arts District

Before

A slow supply line leak had been feeding mold behind the shower wall for months. Black mold growth was visible at the grout line, and the drywall was soft to the touch. Air samples showed elevated spore counts in the adjacent bedroom.

After

We removed the affected drywall, treated the framing with Concrobium, and dried the cavity for three days. Clearance testing came back at outdoor baseline. The wall was rebuilt and painted, and the leak was repaired by a licensed plumber.

Crawl Space Mold Removal in Magnolia Park

Before

A 1928 bungalow had no vapor barrier and standing moisture under the house. Insulation was saturated, joists had surface mold, and the living room smelled musty. Moisture readings on the joists were above 25 percent.

After

We removed the wet insulation, HEPA vacuumed the joists, applied antimicrobial solution, and installed a 6-mil vapor barrier. After four days of dehumidification, joist readings dropped below 12 percent. The musty odor was gone.

Post-Flood Attic Remediation in Studio City

Before

Winter storms drove water through a failing roof flashing. Attic sheathing had mold growth across roughly 120 square feet, and insulation was wet. The homeowner noticed a musty smell in the hallway below.

After

We contained the attic, removed affected sheathing and insulation, treated the rafters with antimicrobial solution, and dried the space for five days. Clearance testing passed, and we improved ventilation to prevent condensation.

Problems we solve

Mold Problems We Solve in NORTH HOLLYWOOD

Most mold calls come down to one of a few root causes. Here is what we see most often and how we fix it.

Ask a pro →
01

Black mold growth behind bathroom walls

We locate the leak with a moisture meter and thermal imaging camera, remove the affected drywall, treat the framing with antimicrobial solution, and dry the cavity. Clearance testing confirms the air is clean before we close it up.

↗
02

Crawl space moisture under older homes

Our crawl space mold removal crew removes contaminated insulation, HEPA vacuums the joists, treats with Concrobium, and installs a vapor barrier. We also run a dehumidifier until moisture readings drop below 15 percent.

↗
03

Attic condensation and roof leaks

We test the attic, contain the work area, remove affected sheathing, and treat the framing. We also improve ventilation so condensation does not return next winter.

↗
04

HVAC mold contamination

We inspect the air handler and ductwork with a boroscope inspection camera, then use a fogger to apply antimicrobial solution. In severe cases we recommend duct cleaning alongside remediation.

↗
Proof you can check

Licensed, Certified, and Insured

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC CMI and CMR credentialsAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) licenseState of California
Good questions

Frequently Asked Questions About Mold Remediation

(833) 929-5837 →

Most residential jobs run $1,200 to $6,500 in 2026, with small bathroom or attic jobs starting around $450 and full crawl space or post-flood remediation going higher. Price depends on square footage affected, whether drywall or framing needs removal, and how many days of drying are required. We give you a flat-rate quote after inspection, before any work starts.

Check three things: a CSLB license, IICRC AMRT certification, and whether they do clearance testing. A contractor who skips post remediation mold testing is guessing. Ask for the lab report from their last job. We provide all three, plus a written workmanship warranty, so you can compare us against anyone else in the Valley.

Yes. We operate under a California Contractors State License Board (CSLB) license and carry general liability and workers compensation coverage. Our technicians hold IICRC AMRT and IICRC WRT certifications, and we follow ANSI/IICRC S520 on every job. We can email a certificate of insurance before we start if your property manager or HOA needs it.

We do. We bill most major carriers directly, provide Xactimate-formatted estimates, and photograph every affected area for your adjuster. If your claim is denied, we offer financing so you can still get the mold removed. Call (833) 929-5837 and we will walk you through what your policy likely covers.

Ready when you are

Call Your Mold Remediation Company in NORTH HOLLYWOOD, California

Mold gets worse every day it sits. We answer the phone 24/7, dispatch same-day, and give you a flat-rate price before we start. Licensed, insured, and IICRC certified. Call (833) 929-5837 now.

Get a Free Quote (833) 929-5837 →
Request an appointment

Contact Our NORTH HOLLYWOOD Team

Call (833) 929-5837 any time - our line is answered 24/7 by a live technician, not a call center. For non-emergency estimates, we schedule same-day or next-day visits across NORTH HOLLYWOOD and the surrounding Valley. Send photos to our email if you want a quick read before we come out.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837