Licensed mold removal for NoHo homes and businesses

Mold Cleanup Near Me in NORTH HOLLYWOOD, California

Mold Cleanup Near Me in NORTH HOLLYWOOD, California starts with a free inspection and a straight answer about what is growing and why. We handle black mold behind drywall, musty crawl spaces, attic condensation and post-leak growth in homes and commercial buildings across the NoHo Arts District, Toluca Lake and Valley Village. Call (833) 929-5837 and we will be on site the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Cleanup Near Me by Mold Remediation Service North Hollywood
Careful work. Honest options.
About this service

What Mold Cleanup Near Me in NORTH HOLLYWOOD, California Covers

Mold Cleanup Near Me in NORTH HOLLYWOOD, California is the physical removal of mold growth, contaminated building materials and mold spores from a home or commercial space, followed by drying and verification that the space is clean. We do not paint over stains or fog a room and call it done. We find the moisture source with a thermal imaging camera and a moisture meter, build containment, remove what is contaminated, and treat the structure so the growth does not return.

Most calls we take in this area start with a smell, not a visible stain. A bathroom that stays damp, a water heater that dripped behind a wall, or a crawl space that never dries out. If you have been searching for mold removal near me NORTH HOLLYWOOD California after a leak, a flood or a slow drip under the sink, that is exactly the work we do. We test first, so you know what you are dealing with before anyone starts cutting drywall.

  • ✓ Same-Day Inspection
  • ✓ Containment Done Right
  • ✓ Insurance Paperwork Handled
  • ✓ Verification After Removal
What's included

What Our Mold Cleanup Near Me Service Includes

Every job includes the inspection, the containment, the removal, the drying and the clearance test. If a job needs something beyond that, such as reconstruction of removed drywall or HVAC duct cleaning, we tell you upfront and price it separately so there are no surprises on the invoice.

✓

Moisture Source Identification

We trace the water back to its origin with a moisture meter and thermal imaging camera. Removing mold without fixing the leak is wasted money, so this step comes first on every job, whether it is a failed shower pan or a roof flashing detail.

✓

Full Containment Setup

Containment plastic sheeting, zipper doors and a negative air machine with HEPA filters isolate the work zone. This protects the rest of your home from cross-contamination while removal is underway and keeps the job scoped to the affected area.

✓

Contaminated Material Removal

Drywall, insulation, baseboards and other porous materials with active growth come out, get bagged and are disposed of properly. Non-porous surfaces like tile, concrete and framing are cleaned and salvaged wherever the structure allows it.

✓

Antimicrobial Treatment and Sealing

Cleaned surfaces get an antimicrobial solution such as Benefect or Concrobium, followed by an encapsulant coating on exposed framing. This is what stops regrowth on wood that stays in the building after the contaminated material is gone.

✓

Structural Drying

Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers run until framing moisture returns to normal, checked daily with a moisture meter. Most jobs dry in 24 to 72 hours, and we do not pull equipment early.

✓

Post-Remediation Clearance Test

Air samples collected with spore trap cassettes go to an accredited lab, with results in 24 to 48 hours. You receive the written report, which is what you need for an insurance claim, a real estate transaction or your own records.

How it works

How Our Mold Cleanup Process Works

01

Inspection and Testing

A technician arrives with a moisture meter, thermal imaging camera and boroscope inspection camera to look inside walls without tearing them open. We take air samples with a spore trap sampler and, when needed, surface samples. You get readings and photos the same visit, usually within 60 to 90 minutes on site.

02

Containment and Air Control

We isolate the affected area with containment plastic sheeting and zipper doors, then set a negative air machine with HEPA filters to pull air out of the space. This keeps spores from spreading to the rest of your home while we work. Setup takes about an hour on a typical residential job.

03

Removal and Cleaning

Contaminated drywall, insulation and trim come out and get bagged. Structural wood is cleaned with HEPA vacuuming and, where the growth is stubborn, dry ice blasting or wire brushing. We apply an antimicrobial solution such as Benefect or Concrobium to the cleaned surfaces, then an encapsulant coating on framing that stays exposed.

04

Drying and Dehumidification

We run Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers until framing moisture reads back to normal, usually 24 to 72 hours depending on how wet the structure was. We check readings daily and do not pull equipment until the numbers hold steady for two consecutive days.

05

Clearance Testing

Once drying is complete, we take post-remediation air samples and send them to an accredited lab. Results typically come back in 24 to 48 hours. If levels are within normal outdoor range, the job is done and you get the report for your records or your insurance claim.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Reveals temperature differences behind walls and under floors that point to hidden moisture. It lets us find the wet zone before we cut anything open, which keeps demolition to a minimum.

Moisture Meter

Reads actual moisture content in drywall, framing and subfloor. We use it to map the affected area, set the drying goal, and confirm the structure is dry before equipment comes out.

Boroscope Inspection Camera

A small camera on a flexible probe that looks inside wall cavities, behind cabinets and under flooring through a hole the size of a coin. It confirms growth without a full demolition.

Air Scrubber and Negative Air Machine

Abatement Technologies units with HEPA filters that pull air out of the containment zone and trap spores. This is what keeps a bathroom job from turning into a whole-house contamination.

HEPA Vacuum

ProTeam and 3M HEPA vacuums used to clean spores off framing, sills and hard surfaces before treatment. Standard shop vacuums blow fine spores back into the air, which is why we do not use them.

Dehumidifier and Air Mover

Dri-Eaz and Phoenix Restoration Equipment units that pull moisture out of framing and drywall. We run them until readings hold steady for two consecutive days.

Spore Trap Sampler

Collects air samples onto cassettes that go to an accredited lab for species identification and spore counts. The same method is used before and after remediation so the numbers are comparable.

Real results

Before and after.

Bathroom Wall Growth Behind Vanity

Before

A slow supply line leak under a bathroom vanity in a 1940s North Hollywood home had been running for weeks. The drywall behind the cabinet was covered in dark growth, the base plate was stained, and the musty smell had spread into the adjacent bedroom. Air samples came back at roughly four times outdoor spore levels.

After

We removed 32 square feet of contaminated drywall and the wet cabinet base, HEPA vacuumed and treated the framing, and dried the wall cavity over three days. Post-remediation air samples returned to normal outdoor range, and the homeowner had the clearance report for their insurance claim.

Crawl Space Joists in Valley Village

Before

A four-unit building on Chandler had visible growth on roughly 60 percent of the floor joists in a 900-square-foot crawl space. Moisture readings on the joists were above 20 percent, there was no vapor barrier, and two of the four tenants had complained about a musty smell in their units.

After

We removed the growth, cleaned the joists with dry ice blasting rather than replacing them, applied an antimicrobial and encapsulant, and installed a 900-square-foot vapor barrier. Joist moisture dropped below 12 percent within a week, and both tenant complaints stopped.

Attic Sheathing After Roof Leak

Before

A roof leak near a chimney in a Toluca Lake home had soaked the sheathing and insulation for most of a rainy season. Roughly 120 square feet of roof decking showed growth, and a bath fan was venting directly into the attic, keeping humidity high year-round. The smell had reached the upstairs hallway.

After

We removed the contaminated insulation, cleaned and treated the sheathing, and rerouted the bath fan exhaust through the roof to the outside. Attic humidity dropped from the high 70s to the low 50s, and clearance testing confirmed normal spore levels in the upstairs rooms.

Problems we solve

Mold Problems We Solve in NORTH HOLLYWOOD

Most of the calls we take fall into a handful of patterns. If any of these sound familiar, the growth is usually further along than it looks from the outside, and the sooner it is tested the cheaper it is to fix.

Ask a pro →
01

Black mold growth behind bathroom walls

We cut a small inspection opening, confirm the species by lab test, then remove the affected drywall and treat the framing. Containment keeps spores out of the rest of the house while we work, and a clearance test confirms the air is clean before we close up.

↗
02

Crawl space moisture feeding mold year-round

We remove growth from joists and subfloor, treat the wood with an antimicrobial and encapsulant, and install a vapor barrier to cut ground moisture. We also check ventilation and recommend fixes so the space stays dry after we leave.

↗
03

Attic condensation and roof leak growth

We test the sheathing and insulation, remove what is contaminated, and clean the framing. Where the cause is a bath fan venting into the attic, we reroute the exhaust outside so the problem does not repeat next winter.

↗
04

Post-flood and post-leak mold after water damage

We extract standing water, dry the structure with dehumidifiers and air movers, and address any growth that already started. Because we handle both drying and removal, there is no gap where the job stalls between two contractors.

↗
Proof you can check

Licensed, Certified and Insured

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC CMI and CMR CredentialsAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
California Contractor LicenseCalifornia Contractors State License Board (CSLB)
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential jobs in this area run $350 to $2,800 in 2026, with a typical bathroom or single-wall job landing around $650 to $1,200. Crawl spaces and attics run higher because of access and square footage. Testing adds $150 to $400. We give you a flat price after the inspection, before any work starts.

Look for IICRC AMRT certification, a CSLB license, and a company that does post-remediation clearance testing with a third-party lab. We hold all three. Ask any contractor for their certification numbers and a sample clearance report before you hire them. If they cannot produce both, keep calling.

Yes. We answer the phone around the clock at (833) 929-5837 and dispatch for emergency mold cleanup near me NORTH HOLLYWOOD CA calls the same night. For active water intrusion, stopping the source and starting extraction within the first 24 to 48 hours is what keeps a small leak from becoming a full remediation.

We are typically on site within 60 to 90 minutes for emergency calls in North Hollywood and surrounding areas like Valley Village and Studio City. Standard inspections are scheduled the same day or next morning. Same day mold removal near me NORTH HOLLYWOOD CA requests are common and we staff for them.

Ready when you are

Get Mold Cleanup Near Me in NORTH HOLLYWOOD, California Today

One call gets a certified technician to your door, a flat price before work starts, and a clearance report when the job is done. We are licensed, insured and answer the phone 24 hours a day. Call (833) 929-5837 now and we will schedule your inspection today.

Book Free Inspection (833) 929-5837 →
Request an appointment

Contact Our NORTH HOLLYWOOD Team

Call (833) 929-5837 any time - our line is answered 24/7 by a live technician, not a call center. For non-emergency estimates, we schedule same-day or next-day visits across NORTH HOLLYWOOD and the surrounding Valley. Send photos to our email if you want a quick read before we come out.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837