Licensed, insured, IICRC-certified crews ready for same-day service

Toxic Mold Removal in NORTH HOLLYWOOD, California

Toxic Mold Removal in NORTH HOLLYWOOD, California means containing the growth, killing the spores, and proving the air is clean before we pack up. Our IICRC-certified technicians handle black mold remediation NORTH HOLLYWOOD California for homeowners, landlords, and business owners dealing with long-term leaks, crawl space moisture, and musty odors. We test first, show you the lab results, then remove the problem at the source.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service near me for NORTH HOLLYWOOD homes
Careful work. Honest options.
About this service

Toxic Mold Removal in NORTH HOLLYWOOD, California

Toxic Mold Removal in NORTH HOLLYWOOD, California is a containment-and-removal process that isolates the affected area, filters the air, physically removes mold-damaged materials, and treats the remaining structure with antimicrobial and encapsulant products. We do not just spray and paint over the problem. We use a thermal imaging camera and moisture meter to find the hidden water source, then a boroscope inspection camera to check inside walls and subfloors. Every job follows ANSI/IICRC S520, the industry standard for mold remediation, so the work is documented and defensible.

North Hollywood homes and businesses deal with mold because of our specific conditions: older 1920s-1950s bungalows near the NoHo Arts District with original plumbing, flat roofs that pond water after winter storms, and crawl spaces that stay damp through the rainy season. When a slow leak runs behind a cabinet for months, that is when toxic black mold removal NORTH HOLLYWOOD becomes urgent. If you have been searching for toxic mold removal in NORTH HOLLYWOOD California near me, we can be on-site the same day with testing equipment.

  • ✓ Cleaner Air Fast
  • ✓ We Find the Water Source
  • ✓ Documented for Insurance
  • ✓ Safe for Families and Pets
What's included

What Our Toxic Mold Removal Service Includes

Every toxic mold removal job includes the full sequence from inspection to clearance testing. We do not sell removal without testing, and we do not call a job done without proof the air is clean. Here is what is covered in a standard scope.

✓

Full Inspection and Moisture Mapping

We use a thermal imaging camera, moisture meter, and boroscope inspection camera to find every affected area and trace the water source. This is not a visual walkthrough. We document readings and photos so you can see exactly what we found and where.

✓

Air and Surface Sampling

We collect air samples with spore trap cassettes and surface samples from visible growth. Samples go to an accredited lab, and results come back in 24 to 48 hours. You get a written report showing spore types and counts before any removal begins.

✓

Containment and HEPA Filtration

We seal the work area with 6-mil containment plastic sheeting and zipper doors, then run a negative air machine with HEPA filtration. This keeps spores from spreading to other rooms. We also tape off HVAC vents to protect your ductwork during the job.

✓

Removal and Antimicrobial Treatment

We remove mold-damaged drywall, insulation, and wood, then HEPA vacuum all surfaces. We apply an antimicrobial solution and use dry ice blasting on framing where needed. Porous materials that cannot be saved go into sealed bags and out through the containment.

✓

Encapsulant Coating and Drying

After removal, we fog the space with Benefect or Concrobium and apply an encapsulant coating to framing and subfloor. We run dehumidifiers and air scrubbers until moisture readings return to normal, usually 12 to 24 hours. This prevents regrowth if humidity rises again.

✓

Post-Remediation Clearance Testing

We run new air samples and compare counts against the outdoor baseline. If levels are not where they should be, we re-clean at no extra charge. Once the lab clears the job, we hand you the report, photos, and a written warranty on our workmanship.

How it works

How Our Toxic Mold Removal Process Works

01

Inspection and Testing

We arrive with a thermal imaging camera, moisture meter, and boroscope inspection camera to map the affected area. We collect air samples with a spore trap sampler and surface samples where visible growth exists. Lab results usually come back in 24 to 48 hours. You get a written report showing spore types and counts before any removal begins.

02

Containment Setup

We seal off the work area with 6-mil containment plastic sheeting and zipper doors, then install a negative air machine with HEPA filtration. This keeps spores from drifting into the rest of your home while we work. Setup takes one to two hours on a typical North Hollywood job, and we tape off HVAC vents to protect the system.

03

Removal and Treatment

Our technicians remove mold-damaged drywall, insulation, and wood, then HEPA vacuum all surfaces. We apply an antimicrobial solution and, where needed, use dry ice blasting to strip mold from framing without damaging the wood. Porous materials that cannot be saved go into sealed bags and out through the containment.

04

Cleaning and Sealing

After removal, we fog the space with Benefect or Concrobium to reach crevices, then apply an encapsulant coating to framing and subfloor. This locks in any residual spores and prevents regrowth if humidity rises again. We run dehumidifiers and air scrubbers until moisture readings return to normal, usually 12 to 24 hours.

05

Clearance Testing

We run post-remediation mold testing with new spore trap cassettes and compare counts against the outdoor baseline. If levels are not where they should be, we re-clean at no extra charge. Once the lab clears the job, we hand you the report, photos, and a written warranty on our workmanship.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Detects temperature differences behind walls and under floors that indicate hidden moisture. This is how we find mold growth that is not visible to the eye.

Moisture Meter

Measures the moisture content of drywall, wood, and other materials. We use it to map the extent of water damage and to confirm when materials are dry enough to rebuild.

Boroscope Inspection Camera

A small camera on a flexible rod that lets us see inside wall cavities, ductwork, and crawl spaces without tearing everything open. It confirms mold growth in hidden areas.

HEPA Air Scrubber and Negative Air Machine

Filters airborne spores and creates negative pressure inside the containment so spores cannot escape into the rest of the home. We run these for the entire job.

Spore Trap Sampler

Collects air samples onto a cassette that is sent to a lab for analysis. The lab report shows spore types and counts, which is how we confirm toxic mold and verify clearance.

Dry Ice Blasting Machine

Uses compressed dry ice pellets to strip mold from framing and subfloor without damaging the wood. Faster and cleaner than sanding, with no chemical residue.

Fogger and Dehumidifier

The fogger applies Benefect or Concrobium mist into crevices that wiping cannot reach. The dehumidifier removes moisture from the air and materials until readings return to normal.

Real results

Before and after.

Kitchen Cabinet Mold in NoHo Arts District

Before

A slow leak under the kitchen sink had been running for months. The cabinet base was covered in black mold, and the drywall behind it was saturated. Air tests showed elevated spore counts in the kitchen and adjacent living room.

After

We contained the kitchen, removed the damaged cabinet and drywall, treated the framing with antimicrobial and encapsulant, and ran HEPA air scrubbers for 24 hours. Post-remediation testing showed spore counts back to normal. The homeowner replaced the cabinet after we cleared the job.

Crawl Space Mold in Toluca Lake

Before

A rental property had a musty smell that tenants complained about for months. Inspection revealed mold on the crawl space joists from a broken irrigation line. The wood was damp, and spore counts inside the home were elevated.

After

We removed the mold with dry ice blasting, treated the joists with antimicrobial and encapsulant, repaired the irrigation leak, and installed a vapor barrier. Post-remediation testing confirmed the air was clean. The tenants reported the smell was gone within a week.

Attic Mold in Sunland-Tujunga

Before

After winter storms, a homeowner noticed dark staining on the attic ceiling. Inspection found mold on the roof sheathing from a combination of roof leaks and condensation. The insulation was contaminated and needed replacement.

After

We removed the mold with dry ice blasting, treated the wood, and replaced the contaminated insulation. We recommended a roofer to fix the leaks. Post-remediation testing showed the attic air was clean, and the homeowner had documentation for the insurance claim.

Problems we solve

Mold Problems We Solve in North Hollywood

Most of our calls come from the same handful of scenarios. If any of these sound familiar, you likely have mold growing somewhere you cannot see.

Ask a pro →
01

Musty odor that will not go away

We trace the odor to its source using thermal imaging and moisture meters, then test the air to confirm. Once we know where the mold is, we contain the area, remove the growth, and treat the structure. The smell goes away because the source is gone, not because we masked it.

↗
02

Black mold behind drywall after a leak

We open the wall under containment, remove the affected drywall and insulation, and treat the framing with antimicrobial and encapsulant. If the wood is structurally compromised, we document it and recommend a licensed contractor. We handle the mold; you get a clear picture of what else needs fixing.

↗
03

Crawl space moisture and mold on joists

We remove the mold from joists and subfloor using HEPA vacuuming and dry ice blasting, then apply an encapsulant coating. We install a vapor barrier to keep ground moisture out and can add ventilation if needed. This stops the cycle and protects the structure.

↗
04

Mold in the HVAC system

We inspect the air handler and ductwork with a boroscope camera, test the air at multiple registers, and if mold is confirmed, we clean the system under containment. In severe cases, duct replacement is the right call. We tell you honestly which option fits your situation.

↗
Proof you can check

Licensed, Certified, and Accountable

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
ACAC CMI (Certified Microbial Investigator)American Council for Accredited Certification
✓
ACAC CMR (Certified Microbial Remediator)American Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential jobs in North Hollywood run $1,500 to $6,500 in 2026, depending on square footage, the type of material affected, and whether crawl space or attic work is involved. A single bathroom ceiling might be $1,200 to $2,000. A full crawl space with ductwork contamination can reach $8,000 or more. We give you a written price after the inspection, and that number does not change unless you approve additional work.

The most common signs are a persistent musty odor, visible dark staining on walls or ceilings, allergy symptoms that get worse when you are home, and a history of leaks or flooding. Black mold growth is not always visible, especially inside walls or under flooring. The only way to confirm toxic mold is lab testing. We collect air and surface samples and give you a report showing spore types and counts within 24 to 48 hours.

Yes, for anything larger than about 10 square feet. Disturbing mold releases spores into the air, and without containment and HEPA filtration they spread to other rooms. Bleach and household cleaners do not kill mold on porous materials like drywall or wood, and they can make the problem worse by adding moisture. For small surface spots on tile or glass, DIY is fine. For anything behind a wall or in a crawl space, call a certified crew.

We can usually do same-day inspection and testing, and we start removal as soon as lab results confirm the scope, often within 24 to 48 hours. For emergency situations like a burst pipe that soaked drywall, we can begin containment and drying the same day to stop mold from taking hold. Call (833) 929-5837 and we will tell you honestly what can happen today versus tomorrow.

Ready when you are

Get Toxic Mold Removal in NORTH HOLLYWOOD, California Today

If you smell something musty or see dark staining on a wall, do not wait. Mold spreads fast, and every day you delay means more material to remove. Call (833) 929-5837 for same-day inspection and testing. We are licensed, insured, and we warranty our workmanship in writing.

Call Now (833) 929-5837 →
Request an appointment

Contact Our NORTH HOLLYWOOD Team

Call (833) 929-5837 any time - our line is answered 24/7 by a live technician, not a call center. For non-emergency estimates, we schedule same-day or next-day visits across NORTH HOLLYWOOD and the surrounding Valley. Send photos to our email if you want a quick read before we come out.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837